Home /
Produse /
Instrumente de proces /
Sonde /
Electrozi /
Electrod de pH industrial cu vârf plat, joncțiune PTFE, sticlă de uz general, conector BNC, Pt100, cablu de 5 m

Electrod de pH industrial cu vârf plat, joncțiune PTFE, sticlă de uz general, conector BNC, Pt100, cablu de 5 m

~~+ TVA~~ 3.431,00 RON + TVA

Hanna presents a series of combination pH and ORP electrodes, including more than 300 models, incorporating over 20 years of electrode manufacturing experience.
The most advanced feature of this series is the electrode shape with a flat tip, virtually eliminating deposits that can foul the electrode, significantly reducing necessary maintenance. This characteristic makes flat tip electrodes ideal for continuous in-line monitoring and for solutions containing aggressive chemicals.

PVDF body
Self-cleaning flat tip sensor for significantly reduced maintenance.
Provided with an internal matching pin that can avoid typical problems caused by grounding loop current.
3/4” NPT external thread on both ends for easy installation

Cable Length:

Connection Type:

Temperature Sensor:

Glass Type:

In stoc

Durata de livrare: 1

Limita stoc

Adauga in cos

Cod Produs: HI1006-2205 Ai nevoie de ajutor? 0264 599 459

Adauga la Favorite

Descriere
Caracteristici
Review-uri (0)

A Worldwide Leader in Electrode Manufacturing

Since the beginning of the 1990’s Hanna has been a leader in the research & development of pH and ORP electrodes. Today, Hanna is proud to
present the latest family of industrial electrodes, the Flat Tip Series, which completes the wide range of Hanna probes for any process application.
All Hanna industrial pH and ORP electrodes are combination type, i.e. the reference half cell and the measurement half cell are assembled in the
same body.

Flat tip pH Electrode

Advantage of flat tip electrodes

In a continuous in-line installation, the glass sensor of the pH electrode can be physically damaged by solution streams containing suspended solids.

Our Flat Tip electrodes are the best answer to this problem. The flat tip virtually eliminates deposits that can foul the electrode, significantly reducing necessary maintenance.

This characteristic makes flat tip electrodes ideal for continuous in-line monitoring and for solutions containing aggressive chemicals.

matching pin

Each pH electrode is provided with an internal matching pin that can avoid typical problems caused by grounding loop current, such as:

progressive damage of the electrode
fluctuating measurements
poor process regulation

In many industrial applications, especially in plating baths, grounding loop current is a very common problem.
When a traditional electrode/controller system is used with the electrode reference connected both to the electrode and to the instrument, a current flow occurs through the reference half cell, causing fluctuations in reading and serious damage to the Ag/AgCl element. The potential matching pin shields the reference from external electrical fields. Shown above, the matching pin allows the measurement to stabilize and ensures effective process regulation. In order to function properly, the matching pin has to be continuously immersed in the measured solution and for this reason is placed near the electrode junction.

Flat tip pH dimensions

Installation

These electrodes have been designed with ¾” external thread on both ends for easy installation. HANNA instruments® also provides a series of probe holders for in-line, tank or by-pass installations for these electrodes, as shown below.

Front thread ¾” NPT

Direct in-line installation ¾” standard tee
Immersion installation in vessel, tank, plating bath with HI 60501 (PVC) or HI 60503 (PVDF) electrode holders with adjustable immersion level: min 10 cm, max 70 cm
Direct pipe installation with HI 60542 PVC electrode holder, 2" thread

Back thread ¾” NPT

Immersion installation with ¾" threaded pipe
By-pass installation with HI 60545 By-pass electrode holder “Loop” configuration Liquid inlet: ¾" Liquid outlet: ¾

HI1006 Series Flat Tip pH Electrode FEATURES/BENEFITS:

Junction

Three junction types are available:

Annular non-clogging PTFE junction, for testing solutions with high content of suspended solids or for high pressure installation
Open junction, ideal for wastewater analysis
Ceramic junction

Glass Sensor

Hanna has developed four types of specialized glass. First is a durable sensor glass for general purpose, industrial use. This glass can withstand the stress of daily use. The remaining types of electrode glass allow continuous monitoring in highly acidic solutions containing fluoride ions, as well as high or low temperature process and streams significantly increase the electrode life

Temperature Sensor

The pH electrodes with built-in 3-wire Pt100 or Pt1000 temperature sensor allow for the temperature compensation of pH readings as well as temperature measurements.

Connection Type

Electrodes are wired for direct connection to a transmitter or process controller, or with the standard BNC connector.

Built-in Amplifier

Models with a built-in amplifier are necessary for long distance measurements, where it is not possible to install a transmitter. The internal amplifier can be powered directly from select Hanna process controllers or a power source that supplies the appropriate voltage.

Cable Length

Non-amplified electrodes are provided with a 5, 10 or 15 m cable (16’, 33’ or 49’)

PVDF Body

The PVDF body used for the Flat Tip Series withstands high pressure and high temperature applications, and guarantees a high chemical and mechanical resistance. These characteristics makes the PVDF material the most recommended for many industrial applications. PVDF is also non-toxic and compatible with food applications.

Product Specifications:

Domeniul de măsurare	GP glass
Tipul celulei de referință	double junction
Tipul joncțiunii / Rata de flux	PTFE
Tipul electrolitului	polymer
Materialul corpului	PVDF
Tipul sticlei	HT - High Temperature LT - Low Temperature GP - General Purpose HF - Hydrofluoric Acid Resistant
Tip / Formă	flat
Mediu	HT glass
Pin de referință	yes
Presiune maximă	6 bar (87 psi)
Lungime Corpului/Lungime totală	140 mm
Senzor de temperatură	none, Pt 100 or Pt 1000, based on selected configuration
Diametrul exterior	22.5 mm
Tip conectare	BNC or direct wire, based on selected configuration

de la 1.341,00 RON + TVA

detalii

Vezi Variante